manualshive.com logo in svg

Danfoss ECL Comfort C31, Руководство пользователя, Страница: 30 / 34

Поделиться
Скачать
Danfoss ECL Comfort C31 Скачать руководство пользователя страница 30

The yellow 
side of the
ECL Card

The yellow

side of the 

ECL Card

Monitor the current schedules

Select between lines 1-7 (Monday, Tuesday ...... 
Sunday) to see your individual schedules.

Line

Circuit

Changeover time

Periods with comfort temp. are 

shown as black bars

Time line

Change the schedules

Select appropriate day.

The changeover point blinks

Adjust the first blinking changeover point, if 
required. The end of the bar moves, extending or 
reducing the comfort period.

Shift to next changeover point and adjust 
accordingly.

Change the schedule for circuit II

Select circuit II to view or change the schedule. 

Use the same method for changes as for circuit I.

4a

Set your personal schedule

4b

Add an extra comfort period

Push the shift and + button simultaneously for 
2 seconds.

The new period appears

Adjust the new period.

Remove a comfort period

Select the period to be removed (blinking 
changeover point)

Push shift and - buttons simultaneously for 
2 seconds.

Cancel changes in your personal settings

Push - and + buttons simultaneously for 
2 seconds to restore the factory settings of the 
actual schedule.

Содержание ECL Comfort C31



































Отзывы:

Нет отзывов