VI.KT.F2.02
© Danfoss 06/2008
DH-SMT/DK
DH-SMT/DK
VI.KT.F2.02
© Danfoss 06/2008
Table of Contents
Introduction ..................................................................................................6
Settings overview
7
Daily use ........................................................................................................8
Temperatures
8
Select control mode
9
Set your personal schedule
9
Maintenance ............................................................................................... 11
Date - time
1000
11
Flow temp. (flow temperature control)
2000
11
Temp. min. (flow temp. limit, min.)
2177
11
Temp. max. (flow temp. limit, max.)
2178
11
Return T limit (return temp. limitation)
4000
12
Limit (return temp. limitation)
4030
12
Gain - max. (return temp. limitation - max. influence)
4035
13
Gain - min. (return temp. limitation - min. influence)
4036
14
Intgr. time (time constant for return temp. limitation)
4037
14
Control param. (control parameters)
6000
15
Auto tuning
6173
15
Motor prot. (motor protection)
6174
16
Xp (proportional band)
6184
16
Tn (integration time constant)
6185
16
M1 run (running time of the motorized control valve)
6186
16
Nz (neutral zone)
6187
17
Application
7000
18
P1 exercise (pump exercise)
7022
18
M1 exercise (valve exercise)
7023
18
P1 frost T (frost protection)
7077
18
P1 heat T (heat demand)
7078
18
Standby T (standby temperature)
7093
19
Ext. (external override)
7141
19
Min. on time (min. activation time gear motor)
7189
19
Daylight (daylight saving time changeover)
7198
20
ECL address (master / slave address)
7199
20
Type
7600
21
Service
8000
22
Code no.
8300
22
Ver. (version no.)
8301
22
Backlight (display brightness)
8310
22
Contrast (display contrast)
8311
22
Language
8315
23
MOD address (MODBUS address)
8320
23
Line
Page
Safety Note
To avoid injury of persons and damages to the device, it is absolutely necessary to read and
observe these instructions carefully. The warning sign is used to emphasize special conditions
that should be taken into consideration.
This symbol indicates that this particular piece of information should be read with
special attention.
How to navigate?
Adjust temperatures and values.
Switch between menu lines.
Select / return.
2 sec.
Return to daily user menu.
What do the symbols mean?
.#$ [
$,/D >BZ
;:::
The desired flow temperature is influenced by for example return temperature.
The actuator closes the control valve.
The actuator opens the control valve.
The actuator does not activate the valve.
The pump is ON.
The pump is OFF.
The controller is in setback mode.
The controller is in pre-setback mode (the symbol is blinking).
The controller is in comfort mode.
The controller is in pre-comfort mode (the symbol is blinking).
