Danfoss DHP-M, Руководство по установке

Страница: 10 / 36

3 Transport, unpacking and setting-up
3.1 Transporting the heat pump
Caution
The heat pump must always be transported and stored upright in a
dry environment. Secure the heat pump so that it cannot tip over dur-
ing transportation.
Caution
If the heat pump is laid on the incorrect side it may become seriously
damaged, as the oil in the compressor may run out into the pressure
pipe and thereby prevent normal functioning.
3.1.1 Unpacking
1. Check that there are no transportation damages.
2. Remove the packaging.
3.1.2 Delivery check
Check that the delivery includes the following items:
Name Quantity
Heat pump 1
Document set 1
Sound plate kit, 086L3375 (DHP-M XL and L)
Name
Article number Quantity
Front and rear plate 086L3376 2
Left and right side plate 086L3377 2
Sensor kit, 086L3546 (in the electrical cabinet)
Name
Article number Quantity
Outdoor sensor 086U3351 1
System supply line sensor 086L3356 1
3.2 Setting-up the heat pump
3.2.1 Recommended location
Positioning the heat pump
▪
The heat pump should preferably be placed against an outside wall (see chapter 'Heat pump data')
▪
Do not place the heat pump against walls facing noise-sensitive areas.
▪
Avoid placing the heat pump in the corner of a room.
Installation Guide DHP-M
VIJSW102 Danfoss Heating Solutions
10