![background image](http://html.mh-extra.com/html/danfoss/dhp-h-varius-pro/dhp-h-varius-pro_manual_3622005023.webp)
N
The tests must first be enabled and then activated.
N
The pump tests (brine pump and circulation pump) can be carried out
in any order.
The test cases in the table below are available in MANUAL TEST.
N
Additional test cases may be applicable if external applications are in-
stalled and activated.
Parameter
Meaning
Compressor
0 = compressor stopped
Set compressor gear 1 –9
Brine pump
0 = stop brine pump
1 = start brine pump
Circulation pump
0 = stop circulation pump
1 = start circulation pump
Internal Immersion
heater
Three steps: 1, 2 and 3.
HGW
0 % = heat
100 % = tap water
Commissioning
DHP-H Varius Pro+/DHP-L Varius Pro+
Danfoss Heating Solutions
VIJSG202
23
Содержание DHP-H Varius Pro+
Страница 1: ...MAKING MODERN LIVING POSSIBLE Commissioning DHP H Varius Pro DHP L Varius Pro www heating danfoss com...
Страница 34: ...Commissioning DHP H Varius Pro DHP L Varius Pro VIJSG202 Danfoss Heating Solutions 34...
Страница 35: ...Commissioning DHP H Varius Pro DHP L Varius Pro Danfoss Heating Solutions VIJSG202 35...