Danfoss DGS Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

Danfoss DGS Series Скачать руководство пользователя страница 4

User Guide

|

Danfoss Gas sensor. Type DGS. Modbus or Service Tool display operation

4 | RS8KD102

© Danfoss | DCS (ADAP-KOOL®) | 2018.12

1

Intended use

The display of the handheld Service Tool and the

Modbus interface for integration with Building

Management Systems is used as interface for

operation, commissioning and calibration of the

DGS gas detection unit

2

Content

This user guide contains the maximum possible

functionality of concerned display devices.

Depending on the DGS type some features

described here are not possible and therefore the

menu items may be hidden.

Some features are available from Modbus or

handheld Service Tool interface only. Differences

is highlighted in this document.

3

Operation

The configuration and service is made via the

handheld Service Tool or in combination with the

Modbus interface.

Security is provided via password protection

against unauthorized intervention.

Handheld Service Tool:

Operation is done via 6 buttons.

AK-SM 800 Front End:

The configuration is done via the graphical

display and buttons or via the PC tools

StoreView Desktop or AK-ST 500.

Gas Detection Service Tool

Esc

←─

D1 CO2 ppm

Warm-up Time

DGS Service Tool

«
...
2
3
4
5
6
...
»

Содержание DGS Series

























Отзывы:

Нет отзывов