![background image](http://html1.mh-extra.com/html/danfoss/control-c-2/control-c-2_operators-manual_3398135028.webp)
6.3.1 Form to a diameter
Screen: Name of current data record.
Touching: Load data record from database.
Delete data record from input field.
Enter forming dimension diameter. The forming di-
mension diameter is the diameter to which the tool
is adjusted.
If a new forming dimension is entered, the set
crimping die diameter is adjusted automatically.
The crimping die table is searched for the next pos-
sible crimping die, which is smaller or equal to the
forming dim0.6 mm.
Enter opening diameter.
The current diameter at which the machine is set is
accepted as opening diameter.