manualshive.com logo in svg
background image

 D
 GB
 F
 E

© Danfoss | Climate Solutions | 2023.06

AQ452531257528en-000201 | 5

1

|

 Safety

These assembly instructions describe the standard version of the compressors named in the ti-

tle manufactured by Bock. Bock refrigerating compressors are intended for installing in a 

 

machine (within the EU according to the EU Directives 2006/42/EC Machinery Directive and  

2014/68/EU Pressure Equipment Directive).

Commissioning is only permissible if the compressors have been installed in accordance with these  

assembly instructions and the entire system into which they are integrated has been inspected and  

approved in accordance with legal regulations.
The compressors are intended for use with CO

2

 in transcritical systems in compliance with the limits 

of application.

Only the refrigerant specified in these instructions may be used.

Any other use of the compressor is prohibited!

1.4  Intended use

1.3 General safety instructions

WARNING

Risk of accident.

Refrigerating compressors are pressurised machines and  therefore 

require particular caution and care in handling.
The  maximum  permissible  overpressure  must  not  be  exceeded, 
even for testing purposes.
Risk of burns! 
- Depending on the operating conditions, surface temperatures of 

 

  over 60 °C on the pressure side or below 0 °C on the suction side   

 

  can be reached.

-  Avoid  the  contact  with  refrigerant  under  any  circumstances.

 

  The contact with refrigerant can lead to severe burns and skin 

 

   irritations.
Danger of suffocation.
CO

2

 is a nonflammable, acidic, colourless and odourless gas 

and  

heavier than air.
Never release significant volumes of CO

2

 or the entire contents of 

the system into closed rooms!

Safety installations are designed or adjusted in accordance with EN 

378-2 or appropriate safety standards.
• 

We expressly point out that all information in this 

 

  assembly instruction has been provided according to our current  

 

  level of knowledge and may change due to further development. 

 

  Legal claims based on the correctness of the information cannot  
  be made at any time and are hereby expressly excluded.

WARNING

The  compressor  may  not  be  used  in  potentially  explosive 

 

environments!

Содержание BOCK HRX CO2 T H





























Отзывы: