521B0741
DKCFN.PI.013.EF4.02 5
23.
Mount the new shaft seal following the instructions in changing
“Shaft seal - APP 1.5 - 2.5” (180R9089)
Wet the torpedo and new shaft seal with soap. Do not use
silicone grease.
Slide the shaft seal over the torpedo with the carbon seal face
pointing upwards.
Be careful not to damage the carbon seal
face on the shaft seal.
24.
Replace the O-ring on the SAE flange
25.
Lubricate the threads on the 4 screws with grease and screw
them into the pump and tighten by hand. Use Molykote D
paste from Dow Corning or Klüber UH1 84-201 from Klüber
lubrication
Selection of spare parts
Please find our APP part list 521B0941 on www.ro-solutions.com
