Instructions for installation and use
Akva Lux II VXe
18 | © Danfoss | Produced by Danfoss Redan A/S | 2021.02
xxxxxxx
Fig. 1. User interface
with a push button and
five LEDs.
Fig. 2. Performance view
13. HEATING CIRCUIT, PUMP
Grundfos Pump UPM3
Grundfos UPM3 Auto has 12 optional settings, which can be select-
ed with the push-botton.
See fig. 1 - User interface
.
The pump is set from factory to Proportional pressure AUTOadapt.
The user interface shows:
* performance view (during operation)
- operation status
- alarm status
* settings view (after pressing the button)
During operation, the display shows the performance of the pump.
By pressing the button, the display changes status or you can
change settings.
The LEDs show the power consumption for the pump.
When the pump is running, LED 1 is green. The four yellow
LEDs indicate the current power consumption.
See fig. 2 - Performance view
.
Performance
% of P
1
max.
Green Yellow Yellow Yellow Yellow
0% (standby)
0 - 25%
25 - 50%
50 - 75%
75 - 100 %
