Danfoss 5000 Flux Скачать руководство пользователя страница 36

Страница: 36 / 68

MG.90.D1.02 – VLT is a registered Danfoss trademark

VLT

5000/5000 Flux/6000 HVAC/8000 AQUA PROFIBUS

Description of the selection

– Not active:

The function is not active.

– Save operations setup:

All parameter setups of

the active setup are saved in EEPROM. The

value returns to

Not active

after all parameter

values have been saved.

– Save program setup:

All parameter setups of the

setup being processed are saved in EEPROM.

The value returns to

Not active

after all parame-

ter values have been saved.

– Save all setups:

All parameter setups in all

setups are saved in EEPROM. The value returns

Not active

after all parameter values have

been saved.

980-982 Defined parameters

(DEFINED PARAM.)

Value

Read only

Function

The three parameters contain a list of all parame-

ters defined in the VLT. Every one of the three

parameters can be read as an array with subindex

255 with the help of the acyclical FMS-

Read s

er-

vice. When the corresponding subindex is used,

individual elements from the list can also be read

by means of DP and cyclical/acyclical FMS. The

subindices begin with 1 and follow the sequence

of the parameter numbers.

Each parameter contains up to 116 elements (pa-

rameter numbers). The number of parameters that

are in use (980, 981 and 982) depends on the re-

spective VLT configuration.

When a 0 is issued as a parameter number, the list

ends.

990-992 Modified parameters

(MODIFI. PARAM.)

Value

Read only

Function

The three parameters contain a list of all parame-

ters that have been changed from the factory set-

ting. Every one of the three parameters can be

read as an array with the help of the acyclical

FMS-

Read s

ervice. When the corresponding subin-

dex is used, individual elements from the list can

also be read by means of DP and cyclical/acycli-

cal FMS. The subindices begin with 1 and follow

the sequence of the parameter numbers. Each

parameter contains up to 116 elements (parameter

numbers). The number of parameters that are in

use (990, 991 and 992) depends on how many pa-

rameters have been modified in comparison with

the factory setting.

Pure read parameters (Read only), such as data

output parameters, are not logged as modified

even if they are changing.

When a 0 is issued as a parameter number, the list

ends.

Parameters

Содержание 5000 Flux





































































Результаты поиска

Содержание 5000 Flux

Отзывы:

Danfoss 5000 Flux, Руководство пользователя, Страница: 36 / 68

Результаты поиска

Содержание 5000 Flux

Отзывы: