2.
-
a.
-
b.
-
c.
-
d.
1.
2.
3.
4.
The next step differs based on the input options present in the drive. Go to the appropriate procedure, based on the op-
tions that are present:
No options
AC fuses only
RFI filter only
AC fuses and RFI filter
No options
Remove 3 M8 nuts (13 mm) at the top of the AC input busbars, 1 per phase.
Remove 3 M8 nuts (13 mm) at the bottom of the AC input busbars, 1 per phase.
Remove 1 M8 nut (13 mm) from the center busbar.
Remove the busbars from the drive.
1
3
2
e3
0b
g6
94
.1
0
Illustration 1: AC Input Busbars (with No Options)
AN275538690239en-000101 / 130R0721
4 | Danfoss A/S © 2022.11
Disassembly
300 A Current Sensor Kit for D1h/D3h/D5h/D6h Drives
Installation Guide
