![background image](http://html1.mh-extra.com/html/danfoss/176f3167/176f3167_application-manual_3412398004.webp)
5.
1.
2.
3.
4.
5.
6.
Lift the grill and top fan from the frequency converter.
e3
0b
g3
93
.1
0
1
2
3
4
5
6
Illustration 1: Top Fan with Grill
1
Screw (T25)
2
Top fan grill
3
Top fan
4
Top fan cable and connector
5
Top vent
6
Cable access hole
2.4 Installing the Top Fan and Grill
To install the top fan and grill, use the following steps.
Feed the top fan cable through the cable access hole on the top of the frequency converter.
Reconnect the in-line fan cable connector.
Position the fan on top of the frequency converter with the air direction arrows pointing upward and away from the unit.
Place the grill on top of the fan.
Fasten 2 screws (T25) in opposite corners of the grill, securing the top fan to the frequency converter.
Position the front cover on the frequency converter, and fasten with 2 screws (T25).
AN389655468601en-000101 / 130R0767
4 | Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide