Danfoss 101N0715, Руководство по эксплуатации

Страница: 13 / 28

TOOL COOL
4
®
BD Controller
101N07xx Series
24 V DC
13 DEHC.PS.100.I1.02
4. Parameters
Parameter Group Parameter Description Default Max value Min value Step Unit Type
Main functions Main switch
On/Off regulation of power supply to
controller
OFF ON OFF 1
Battery
protection
Battery cutout level
Battery protection cut-out voltage
level
21.3 27 19 0.1 Volt Setting
Battery cutin diff.
Voltage difference between battery
cut-in and cut-out
3.9 10 0.5 0.1 Volt Setting
Cutout delay
Time to cut-out when non-critical
battery protection implemented
3 60 0 1 Seconds Setting
Cut-in level
Calculated value.
Cutin = Diff.
0.1 Volt Measurement
Supply voltage
Real-time voltage measured
on + & - terminals
0.1 Volt Measurement
Compressor Requested speed
Compressor speed and therefore
capacity definition
4000 4000 2500 100 rpm Setting
Start delay
Time to start after
compressor is switched ON
4 240 2 1 Seconds Setting
Start speed
Optional startup speed lower than
Requested speed, during the period
Start time.
2500 4000 2500 100 rpm Setting
Start time
Period of time elapsing after startup
of compressor until Requested speed
is reached
30 600 0 1 Seconds Setting
Compressor speed Real-time speed (+/- 10%) 1 rpm Measurement
Condenser fan Cond. Fan voltage
Supply voltage to the
condenser fan.
24 31 12 1 Volt Setting
Fan speed
Condenser fan speed synchronized
with compressor operation
100 100 40 10 % Setting
Fan start delay
Time to start as a function of
Thermostat
0 240 0 1 Seconds Setting
Fan stop delay
Time to stop as a function of
Thermostat
0 240 0 1 Seconds Setting
Fan forced ON
Force condenser fan continuously
ON or OFF
OFF ON OFF 1 Setting
Detect missing fan
Detect whether condenser fan is
connected
OFF ON OFF 1 Setting
Fan speed Real-time condenser fan speed 1 % Measurement
Evaporator fan
Evap. Fan voltage Supply voltage to the evaporator fan. 24 31 12 1 Volt Setting
Fan speed
Evaporator fan speed
synchronized with
compressor operation.
100 100 40 10 % Setting
Fan start delay
Time to fan start as a
function of Thermostat
0 240 0 1 Seconds Setting
Fan stop delay
Time to fan stop as a
function of Thermostat
0 240 0 1 Seconds Setting
Fan forced ON
Force evaporator fan
continuously ON or OFF
OFF ON OFF 1 Setting
Detect missing fan
Detect whether evaporator fan is
connected
OFF ON OFF 1 Setting
Fan speed Real-time evaporator fan speed 1 % Measurement
The user can change settings and observe real-time measurements (read-only)
in the following parameters.
The table in
4.1 Parameter Overview is intended for easy reference.
For more detail, please refer to
4.2 Description of Parameter Groups.
4.1 Parameter
Overview