Danfoss 088U0212, Инструкция

Страница: 6 / 72

Instruction CF-RD Room Thermostat with Display
5 VI.UH.Q4.1C
Produced by Danfoss Floor Heating Hydronics 03.2007
GB Activate Install mode on Master Controller
- fig. 1
• Use the menu selection button to select the
Install mode. Install LED flashes
• Activate Install mode by pressing OK . Install
LED goes ON
Activate Install mode on Room Thermostat
• Press the push button . LED and flicker
during communication
Select output on Master Controller
• All available output LEDs on Master Controller
light up, and the first of them flashes
• Press output selection button , select desired
output (flashes) and accept with OK
• All output LEDs go OFF. Selected output
stays ON shortly
Room Thermostat installation status
• Satisfactory - LED goes OFF
• Not satisfactory - LED flashes 5 times
Note: A Room Thermostat can be assigned to several
outputs if needed by repeating the installation process.