Dane Technologies, Inc.
QuicKLEEN
Owner’s Manual
7105 Northland Terrace Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
970-115 Rev. A 11/7/11
14
WARNING
Do not use long extension cords. Use the cord supplied with the machine. Find a
location for re-charging, which is close to an electrical outlet receptacle. If
another cord must be used, it must be 16 gauge or larger and no more than 10
feet in length.
1. Before using the battery charger, read all instructions and cautionary marking
related to the:
a. Battery charger
b. Battery
2.
CAUTION:
To reduce risk of injury, charge only 2-12 volt gel, sealed, or
wet lead type rechargeable batteries hooked up in series. Other types of
batteries may burst causing personal injury or damage.
3. Do not expose charger to rain or snow.
4.
CAUTION:
To prevent the risk of fire, use the charger only in dry and
ventilated rooms without flammable fluids and explosive gases.
5. To reduce the risk of damage to the electric plugs and cord, pull by plug rather
than the cord when disconnecting the charger.
6. Do not use an extension cord unless absolutely necessary. Use of an improper
extension cord could result in risk of fire and electric shock. If an extension cord
must be used, make sure:
a. The pins on the plug of extension cord are the same number, size and
shape as those on the charger
b. The extension cord is properly wired and in good electrical condition and
the wire size is 16 gauge or larger and no more than 10 feet in length
7. Make sure cord is located so that it will not be stepped on, tripped over or
otherwise subject to damage or stress.
8. Do not operate charger with damaged cord or plug
– replace immediately!
9. Do not operate a charger if it received a sharp blow, has been dropped or
otherwise damaged in any way.
10. Do not disassemble charger!
11. To reduce risk of electric shock, unplug charger from AC mains and battery outlet
before attempting any maintenance or cleaning.
