D&R ELECTRONICS PDU-16SS Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 12

D&R ELECTRONICS PDU-16SS Скачать руководство пользователя страница 3

212-0024-SS

3

July 30th, 2019

Introduction

The PDU-16SS is designed to provide automotive emergency and public service vehicle equipment installers
with a solid state, single point power distribution system for installed electrical devices.  The installation is
fast, reliable and safe.  It offers programmable low battery voltage shutdown, programmable timed shut-
down, power distribution and equipment protection.  The PDU-16SS provides a direct, easily traceable route
to the input power source avoiding interfering with the vehicles factory wiring harnesses.  All circuits are in-
dividually fused (MAXI fuse for the heavy duty outputs & MINI fuses for the standard outputs) and each out-
put has a FUSE OK LED indicator for ease of troubleshooting.

Features



Programmable Low Battery Voltage Shutdown



Programmable Timed Shutdown



Vehicle Battery Voltage Monitoring



Each output has an LED fuse status indicator



Standby Mode



Timed Shutdown Mode



Test Mode



Reset Mode



16 Outputs

Technical Specifications

Voltage Range: 11-18 VDC
Maximum Current Load: 15A per output, fused at 20A

30A per heavy duty output, fused at 50A

100A total maximum current per PDU

Stand-by Current: 0A
Programmable Low Voltage Disconnect: Programmable from 11VDC

Factory default set at 11.5VDC (10 second delay)

NOTE:

Battery manufacturers recommend to not program low voltage disconnect below 11 VDC

unless the vehicle is equipped with a second battery.

High Voltage disconnect set at 18VDC, (10 second delay)
Programmable timer setup: 1 minute - 99.59 hours.
Fuse Type: MINI fuse for regular outputs.

MAXI fuse for heavy-duty outputs.

Operating Temperature: -40

° C to +65° C (-40F to +149F)

Dimensions: L 10.55” X W 4.26” X H 1.1”
Weight: 1.85 Lbs

«
1
2
3
4
5
...
»

Содержание PDU-16SS













Отзывы:

Нет отзывов