Dando TERRIER Mk 1, Руководство по эксплуатации и техническому обслуживанию, Страница: 63 / 276

5.9.1 HOW TO CHECK AND RESTORE THE PRESSURE IN THE
HYDRAULIC TRANSLATION SYSTEM
FIGURE 5.8 - DISTRIBUTOR
LEFT TRACK
To check correct pressure, once the manometer has been positioned in
measuring point
“P2”, lock the left track by setting a fixed point between the
drive wheel and the machine frame. Rev up the machine to the set number
of revolutions (3600 rpm) and read the pressure indicated on the manometer.
If it does not match the set point, operate the max. pressure valve
“V2” set
on the distributor, turning it until the pressure indicated in the table has been
reached.
RIGHT TRACK
To check correct pressure, once the manometer has been positioned in
measuring point
“P1”, lock the right track by setting a fixed point between the
drive wheel and the machine frame. Rev up the machine to the set number
of revolutions (3600 rpm) and read the pressure indicated on the manometer.
If it does not match the set point, operate the max. pressure valve
“V1” set
on the distributor, turning it until the pressure indicated in the table has been
reached.