Dando TERRIER Mk 1, Руководство по эксплуатации и техническому обслуживанию, Страница: 246 / 276

12
3.2. GENERAL STANDARDS FOR SAFETY AND USE
The present manual contains the information required to run the machine.
Contact the Manufacturer for any spare parts, accessories or information you might
require.
The tracked dumper fit with bucket or open dump body serves to carry and dump
materials. It can be equipped with a self-loading bucket (for details see the
supplied and possible optional accessories).
The materials being handled must comply with the characteristics of the equipment
currently being used.
Avoid abrupt movements. All movements and manoeuvres must be performed with
utmost care and while running at a slow speed.
Check that the work area is free and that there are no unauthorized persons
around. Also check that no one enters or passes within the machine operating
range.
In case of operating anomalies while moving the various mobile parts of the machine, turn
the engine off immediately.
Never perform any checks, controls or maintenance operations with the engine
running.
Never transport or lift anyone except the operator.
When hoisting and transporting the machine, follow the instructions given in the
specific chapter.
Before starting up the machine, make certain that the load has been positioned
correctly in the dump body.
When moving over a slope, whether moving forward or in reverse, always make
certain that the weight is evenly balanced. If the unit has a bucket, set it in a
position that improves stability.
Never
move over terrain that has both a lateral and longitudinal slope . The
terrain must be solid and compact .
Before tipping the hopper or loading bucket, check that the loaded material can
slide freely. If the hopper or loading bucket are lifted with the material blocked
inside stability may be lost, therefore this operation
is prohibited
. This situation is
riskier if lifting and unloading is carried out laterally.
The machine can be used for unloading on ground with a gradient lower than 25%
(both lateral or longitudinal). It is prohibited to unload where there is a longitudinal
and lateral slope present at the same time.