D&H DH05C, Руководство пользователя

Страница: 31 / 70

31
8.2 Setting options
The features of a locomotive operated in the DCC-operating mode can be varied by programming the "Configuration
Variables" (CV) freely at any time. The programming procedure is described in the instructions of your programming
device.
Instructions for "Function Mapping" by devault see Doehler & Haass-website:
https://doehler-haass.de/cms/pages/haeufige-fragen.php:
Wie sieht das standardmäßige "Function Mapping" aus? (Only in German)
Notice:
In case the speed steps programmed on the decoder differ from those of the control device, malfunctions may
occur. Please pay attention to the information concerning your digital system.
List of supported CV:
CV Name and definition Range (Std.)
01 Address
Addresses higher than 127 are only usable in MM-operation
(Not relevant to PD05A/PD12A)
0
– 255
(3)
02 Starting voltage 0
– 15
(0)
03 Acceleration time
The value corresponds to the time in seconds form start to maximum speed
0
– 255
(3)
04 Deceleration time
The value corresponds to the time in seconds form maximum speed to stop
0
– 255
(3)
05 Maximum speed (See supplement 2) 0
– 127
(92)
07 Version number (Read only)
08 Manufacturer identification (Read only)
97 = Doehler & Haass (Decoder Reset with "8")