background image

Z5394 Y Flying adapter

1.1  Safety
1.1.1  Intended use

The Z5394 Y Flying adapter must only be used in conjunction with

the d&b Y-Series Y8 and Y12 loudspeakers as described in this

manual.

1.1.2  General safety

▪ Installation and setup should only be carried out by qualified

and authorized personnel observing the valid national Rules for

the Prevention of Accidents (RPA).

▪ It is the responsibility of the person installing the assembly to

ensure that the suspension/fixing points are suitable for the

intended use.

▪ Always carry out a visual and functional inspection of the items

before use. In case there is any doubt as to the proper

functioning and safety of the items, these must be withdrawn

from use immediately.

Please also refer to 

Þ

 Chapter 3 "Care and maintenance"

on page 9.

1.1.3  Load safety information

NOTICE!

The Z5394 Y Flying adapter is designed to suspend a total of

6 x Y8 or Y12 cabinets which corresponds to a total system weight

of 123 kg (271 lb) – SWL.

1.2  Scope of supply
Please verify the shipment for completeness and proper condition

of the items.

Qty.

d&b Code

Description

1

Z5394

d&b Y Flying adapter 

[1]

Including:

1

E6507

1t shackle 

[2]

1

D2719.EN .01

Z5394 Rigging manual

Weight

3.6  kg / 8 lb

Z5394 Y Flying adapter dimensions in mm [inch]

1  Z5394 Y Flying adapter

 

d&b Z5394 Rigging manual 1.2 en

4

Содержание Z5394












Отзывы: