Z5160 Load adapter
Table of content
1. Product description...............................................................................................3
2. Safety instructions.................................................................................................4
3. Load safety information.....................................................................................4
4. Part list Z5160 Load adapter............................................................................4
5. Weight Z5160 Load adapter............................................................................4
6. Assembly.................................................................................................................5
6.1. Quick lock mechanism of the locking pins............................................5
6.2. Fitting to the Z5159 Flying frame and adjustment.............................5
7. Maintenance and care........................................................................................6
7.1. Test recommendations...............................................................................6
8. Rigging example...................................................................................................6
1. Product
description
Fig. 1: Z5160 Load adapter
11
12,5
2,50
17
Fig. 2: Z5160 bottom row of holes and
vernier scale
The Z5160 Load adapter is intended for the use together with Z5159
Flying frame for arrays of Q loudspeakers to be suspended from a
single flying point.
The load adapter is supplied with one 2t Shackle and two locking pins,
12 mm (B2212) which are fixed to the adapter with a steel wire. The 2t
Shackle also allows the the Z5155 Hoist connector chain to be applied.
A second hole (
∅
: 11 mm/0.4”) opposite to the 2t shackle is supplied to
accept the Z5147 Rota Clamp.
The bottom row of holes (
∅
: 12.5 mm/0.5”) is splitted into two groups of
four holes building a “quad vernier” along with the respective hole
above the hole labeled as “1/1” (see (Fig. 2).
The Load adapter therefore allows a “quad hole value” between the
holes grid of the bars of the flying frame.
Depending on the chosen lifting device – 2t shackle or Rota clamp – the
matching vernier scale is printed on both sides of the load adapter (see
Fig. 3/4)
FRONT
SELECT
LIFTING POSITION
AND INSERT PIN
Z5160
1
2
INSERT
SECOND PIN
BEFORE LIFTING
Z5159
FLYING FRAME
Fig. 3: Z5160 Vernier scale for 2t Shackle
FRONT
SELECT
LIFTING POSITION
AND INSERT PIN
Z5160
1
2
INSERT
SECOND PIN
BEFORE LIFTING
Z5159
FLYING FRAME
Z5147
Fig. 4: Z5160 Vernier scale for Rota Clamp
Z5160 Mounting instructions
(1.0E)
Page 3 of 6
