XSL Rigging components
11. On the last cabinet, ensure the Front links are stored in their
park positions.
Attaching the flying frame
The touring cart is also intended to carry the flying frame during
transport. To attach the flying frame, proceed as follows:
1. Extend the Front links of the cabinet on both sides.
2. At the rear, release Locking pin
[2] and ensure Locking pin
[1] is inserted into the red marked 0° hole (
Þ
Red labeled
holes -
) at the top of the center hole grid.
3. Attach the flying frame to the Front links of the cabinet and
reinsert the Locking pins on both sides.
4. At the rear, insert the flying frame's Rear link into the rear
rigging strand of the cabinet.
5. Raise the back of the flying frame until the Rear link has
engaged.
6. Reinsert the Locking pin
[2] (Safety pin).
Storing the load beam
The touring cart provides a storage tray for the load beam.
d&b XSL Rigging manual 1.1 en
- preliminary -
24
