XSL Rigging components
Loading the cart
Prepare the Front and Splay links of the first cabinet as described
Chapter 3.12 "Cabinet rigging mechanism" on page 20.
1. At the front of the cart, release the Locking pins from their park
positions on both sides.
2. At the rear center Splay link slot, release the bottom Locking
pin.
3. Attach the first cabinet to the front support and reinsert the
Locking pins on both sides.
4. At the rear of the cabinet, ensure Locking pin
[3] is inserted
into the
0° hole of the inner hole grid (
Þ
Red labeled hole
-
).
5. Insert the Splay link into the Splay link slot.
6. Lift the back of the cabinet until the Splay link has engaged
and reinsert the bottom Locking pin to fix the link in place.
7. Finally, extend the Front links of the first cabinet to attach the
next cabinet.
8. For the remaining three cabinets, proceed in the same manner.
9. Attach the next cabinet to the previously extended Front links
of the first cabinet and reinsert its Locking pins on both sides.
10. At the rear of the cabinet, ensure Locking pin
[3] of the upper
cabinet is inserted into the
0° hole of the inner hole grid (
Þ
Red labeled hole -
) and the Splay link is fixed to the
the
0° hole of the center hole grid of the bottom cabinet.
d&b XSL Rigging manual 1.1 en
- preliminary -
23