Care and maintenance
3.1 Transport / Storing
During transport ensure the stacking frame is not stressed or
damaged by mechanical forces. Use suitable transport cases.
Due to their surface treatment the rigging components are
temporarily protected against moisture. However, ensure the
components are in a dry state while stored or during transport.
3.2 Visual and functional inspection
WARNING!
Potential risk of personal injury and/or
damage to material.
To eliminate the risk of accident due to malfunctioning of a
component, regularly inspect all system components.
Stacking frame
▪ Visual inspection regarding any indication of deformation and
damage (e.g. cracks and corrosion) including all drilled holes of
the component.
▪ Regularly check the flatness of the frame. For this purpose,
position the frames on a flat surface and visually check the
frame for deformation and/or torsion. For obvious deformation
and/or torsion contact d&b audiotechnik for further advice on
how to proceed.
Cabinet enclosure
▪ Visual inspection of all fitting plates for obvious damage (e.g.
cracks or corrosion).
▪ Visual inspection of the rear rigging strand for obvious damage
(e.g. cracks, deformation or corrosion) including all drilled holes
of the component.
▪ Inspection of all fitting plates including front grills to ensure they
are securely attached.
▪ Regularly lubricate the sockets using WD-40
®
or a similar
product.
Front and Splay/Rear links
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
Locking pins
▪ Visual inspection for deformation, cracks and corrosion of the
component.
▪ Inspection for missing ball bearings and damage.
▪ Functional inspection of the release mechanism to ensure it
operates properly.
▪ Regularly lubricate the Locking pins using WD-40
®
or a similar
product.
3 Care and maintenance
d&b Z5731 Rigging manual 1.1 en
9
All manuals and user guides at all-guides.com
