Assembly/Disassembly
6. On the bottom cabinet, release Locking pin
[2].
7. Use Locking pin
[1] to set the desired splay angle (e.g. 5°) on
the upper hole grid of the bottom cabinet.
8. Lower the upper cabinet and insert the Splay link into the rear
rigging strand of the bottom cabinet.
9. Raise the back of the upper cabinet until the Splay link has
engaged and reinsert the second Locking pin
[2] (Safety pin).
To add further cabinets, proceed in the same manner until the
assembly is completed.
NOTICE!
Potential risk of damage to the rigging components.
To avoid any damage to the Front links of the uppermost cabinet of
the groundstack, ensure these Front links are kept in their park
positions on both sides.
d&b Z5731 Rigging manual 1.1 en
7
All manuals and user guides at all-guides.com
