19
18
Manual
Manual
DOORS ASSEMBLY
13-д
12-д-п
Д
Е
П-12-д-п
12-д-п
14-д
14-д
13-д
Г
12-д-л
16-к
Ж
12-д-л
З
13-дн
П-13-дн
DOORS ASSEMBLY
Arrangement of
angles for fastening
of polycarbonate on
the doors.
Fig. 7.1
screw
screw
Install honeycomb polycarbonate with a specified side facing outwards
(sunward); this side has a covering layer (make sure to clarify it on
buying or prior to installation). Covering layer is usually placed on the
side with notations on the shipping film. The film is transparent on the
opposite side of a sheet. After marking the sheet but prior to cutting
it, mark the side with the covering layer on each piece of the sheet:
when the shipping film is removed sheet sides look the same. Shipping
film shall be removed from the both sides immediately before fastening
covering on the frame.
Cut the sheets using a fret saw or a fine-pitch arm saw.
STAGE 8
Installation of covering
