Dancover Omnis, Руководство пользователя

Страница: 21 / 24

2
4
Maintenance and cleaning
• Disconnect the plug from the socket before cleaning or when the
product is not in use for prolonged periods of time.
• When cleaning, do not spray cleaners or water directly into the product.
• Apply the cleaner on a rag and wipe the product.
• Regular maintenance of the product is recommended as this will prolong
the product’s service life and appearance (in coastal areas, the product
should cleaned more frequently, due to atmospheric salinity).
• Regularly check the cord for damages and ensure that the plug is clean.
• If the power cord needs replacing, this must be done only by a qualified
professional.
Troubleshooting
Follow the troubleshooting steps listed below:
• Make sure the power cord is connected correctly.
• Check the cable for any ruptures.
• Make sure the On/ Off switch has been pressed.
• Check whether the bulb is blown.
• If the product is turned off because due to overheating caused
by improper use (overheat sensor), the product must be
disconnected from the power source and cool off. Check the
product for defects after 30 minutes of cooling. If there are
no visible defects, try to reconnect the product again. Please
contact the place of purchase if the product does not work.
Please contact the place of purchase if this did not solve your problem.
Disposal
The product should not be disposed of along with household waste.
Instead, the product must be disposed of along electronic waste by drop-
ping it off at collection points for recycling of electronic waste. To learn
more about where you can drop off your electronic waste for recycling,
contact your local authority or your local waste management authority.
UK
Omnis Manual DK,DE,NL,FR,UK.indd 20 05/07/11 10.58