Step #
4
--POSITION ROOF COVER
As figure
8
shows, when ready to install Roof Cover, unpack cover and lay parallel to
building frame on one side. Cover must be pulled over top of frame assembly without
being snagged or stressed on any frame members. Use multiple ropes over top of
frame as shown in picture below. Having another person inside frame on a ladder to
assist in getting Roof Cover over frame will insure the cover will go on without any
damage.
Figure
8
: Pull the Roof Cover over the frame evenly
First circle the band for tie down ratchet(part#
23
) around the tensioning tube through
the cuts on the pocket of the roof cover.
Then put the bands through the reel of the ratchet.
Figure
9
Fastening the Roof Cover
