Step #2 --ARCH ASSEMBLY
Assemble each arch on ground. Each arches consist of:
One curving roof tube (Part #1)
Two roof curving tube (Part #2/2A)
Two curving sidewall tube (Part # 3/3A/3B)
Figure 4 the arch installation
Connect the arches by Using the hexagon bolts with washers and nuts through
predrilled holes in frame members. Do not tighten down the nuts completely until
frame is fully assembled and set in place.
THE FRONT PANEL FRAME ASSEMBLY
Figure 5 Frame Installation for Front Panel
Assemble the front panel frame. According to Figure 5, connect the end wall frame by
Using the bolts with washers and nuts through predrilled holes in frame members. Do
not tighten down the nuts completely until frame is fully assembled and set in place.
NOTE: Please notice that the part code of the arch sections.
The sections of different arches are not the same.
