Manual
21
Cutting and fastening of coverage
11.
Cellular polycarbonate shall be installed strictly defined side out
(towards the sun), which has a protective layer. The protective layer is
usually at the side with the inscriptions on the transport film. The film on
the other side of sheet is transparent. After marking the sheet, but prior to
its cutting, make a mark on the protected side of the sheet for each piece:
after removal of the transport film sheet sides are not visually different.
The transport film is stripped from both sides immediately before fixing the
cladding on the frame.
Sections of polycarbonate with
open honeycombs should be
covered by adhesive tape.
6000
2000
1000
1054
Содержание ARROW 3m Series
