Dancover ARROW 2,6, Руководство пользователя

Страница: 16 / 29

15
Manual
Attention! The side edge of a piece of cover surface shall be lined up by parts 7,
8, and the upper edge should be 30 mm higher above the lower edge of part 5.
Mark with oversize for parts 4н and 4в.
Крепление покрытия
The polycarbonate should be installed with the strongly defined outer
side (towards the sun), having a protective layer (always make sure
when purchasing or before installation). The protective layer is usually
on the side with inscriptions on the packaging film. On the other side
of the sheet the film is clear. After drawing the planning lines on the
sheet but before cutting it, mark the protective side of every piece of
polycarbonate: after removing the packaging film, both sides of the
sheet look very similar. The packaging film should be removed from
both sides right before fastening the cover surface to the frame.
Pic. 14
Marking
8
5
2
4в
4в
М5х10
Angle
30 mm
cover surface
2000
2100
marking
- Places for joining angles to the butt end