Dancover ARROW 2,6, Руководство пользователя

Страница: 6 / 29

5
Technical certifi cate
1.
Before the start of operation, the
greenhouse should be assembled and
installed as prescribed in the manual.
When the greenhouse is assembled
by a third party the customer should
supervise the quality of works to ensure
compliance with the present manual.
2.
The greenhouse cover surface should
not be removed for the winter period if
snow load is limited. If the greenhouse
is left unattended for the entire winter
the customer should either remove the
cover surface or estimate the possible
snow load. For the frame assembled
with all parts including strainers and
braces, the maximal snow load begins
when the layer of snow weight is 450
kg per 1 sqm of horizontal surface,
which corresponds to 2.25 m of fresh
snow and 1.1 m of settled snow.
The recommended thickness of the
Operation rules
Cleaning and washing sheets of polycarbonate.
1.
Rinse the sheet with warm water.
2.
Wash the sheet with a solution of soft soap or with a domestic detergent and
warm water, using a soft rag or a sponge to take away the dirt.
3.
Rinse with cold water and dry with a soft rage to take away the water.
By disinfection of the greenhouse from fungus and biological diseases
pathogens do not use “sulphuric sticks”
When cleaning polycarbonate sheets never use abrasives or high-alkali
cleaning compositions. Dry wiping of the surface can damage the protective
layer and reduce its life cycle. Never use brushes, gauze fabric or other
abrasive materials to wipe the surface of polycarbonate sheets.
honeycomb polycarbonate (4 mm) is
sufficient for midland Russia conditions.
However, for areas where snow layer
exceeds 0.6 m the upper part of the
greenhouse should be covered by thicker
polycarbonate in accordance with local
weather conditions.
Do not install the greenhouse too close
to buildings or trees where masses of
snow/ice can fall on it. Recommended
distance is at least 1 m.
The greenhouse is designed to withstand
wind at the speed below 24 m/sec