PATIO KIT
INSTALLATION
The patio kit has been designed to fit most standard patio doors.
Please note that when the patio kit is installed,
the patio door will require a locking bar or other security mechanisms; the patio door cannot be locked
when the patio kit is installed.
Patio door: Minimum & Maximum
Patio
door
Patio Slider Kit:
Min: 72cm (2.36ft)
Max: 203cm (6.66ft)
NOTE:
The patio slider is a slider accompanying the window
kit, that has a series of factory cut holes along its sides: use
these holes to screw the patio slider kit securely into position,
as depicted in
Fig. 3
.
Fig. 3
Patio Door Installation
Refer to
Fig. 3
while following the below instructions:
1)
Select a suitable location, making sure you have access to an electrical outlet.
2)
Install the intake / exhaust hoses to the rear of the unit (
Accessories #1
)as shown in
Fig. A,
page 4.
3)
Install the window slider kit (
Accessories #3
).
4)
Attach the two intake / exhaust hose adapters (
Accessories #2
) to the end of each hose.
5)
Attach the intake / exhaust adapters to the holes in the patio door kit, making sure the patio door kit is
securely in place.
NOTE:
Ensure that the exhaust hose adapter is above the intake hose adapter (to prevent the unit from taking
in hot exhaust air).
6)
Plug power cord into a
115 V / 60 Hz grounded
electrical outlet.
INSTALLATION INSTRUCTIONS (cont’d)
6
Содержание Premiere DPA120DHB1GP
Страница 9: ......
