Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
Sharing keys
with others
To share access with
others, you need to
open the lock menu.
Press the first icon.
Do this by swiping the key from right
to left (using your finger).
You now have to decide if you want to
send a permanent or a temporary
access to your home.
The key will be permanent if you don’t
insert dates in the calendar boxes.
If you write date and time in the
calendar boxes, the key will only work
in the period you specify. You can send
your key-invitation as a SMS, email or
via the danalock server.
The recipient will recive an e-mail
from the Danalock team explaining
what to do next.
17
danalock App:
Sharing keys with others
Index