![background image](http://html1.mh-extra.com/html/danalock/125/125_quick-start-manual_3354637002.webp)
First you have to
remove your
current door
lock. Start on the
outside of the
door by removing
the rosette and
the screw. (a)
Remember to
unscrew the
lock-screw in the
mortisse-plate
at the side of
the door. (b)
Just unscrew the small screws
on both sides
of the part you
want to remove and pull the
cylinder apart.
Please look at the size guide
”
4. Which brass tube fits?”
to find the right length of
brass tube.
Assemble the cylinder and
screw the tiny screws back in.
In the Danalock package you’ll find an adjustable cylinder, a small screwdriver,
two breakable screws and 6 brass tubes.
When you remove one or more parts of the cylinder you’ll have to exchange
the brass cylinder in the center with another that fits the new measurements.
Below you see the different combinations and the right brass tube to use.
The full adjustable cylinder as it is from the Danalock package
1. Remove the current door lock
Remove the
rosette and
unscrew the
remaining screw
on the inside of
the door. Save
the screw for
later use.
Insert your key
and turn it so
the cam lines
up with the
body of the
cylinder.
Now you can pull
out the cylinder.
a
b
cam
2. Take out the cylinder
3. Choose your new cylinder
4. Which brass tube fits?
=
7
+7
=
10
+10
=
+15
10
7
=
+22
15
7
=
+25
15
10
=
15
10
7
=
7
15
10
7
15
10
+25
Measure from
center of screwhole
Insert new brass tube
7
Measure
the back part of the
old cylinder
from the middle
of the screwhole and away
(see top illustration).
In the Danalock box you’ll find
an adjustable lock cylinder.
outside
of door
Back part
with 7
spacer
pieces
with 10
spacer
pieces
with 10+7
spacer
pieces
with 15+7
spacer
pieces
with 15+10
spacer
pieces
with all
spacer
pieces
Fits min. 35 mm
Fits min. 40 mm
Fits min. 45 mm
Fits min. 50 mm
Fits min. 55 mm
Fits min. 60 mm
Fits min. 65 mm
EURO version quickmount
page 1