Danaher Motion Superior SLO-SYN SS2000MD4-M, Руководство по установке

Страница: 8 / 31

7
SECTION 3 INSTALLATION
3.1 MOUNTING
The SLO-SYN Drive is mounted by fastening its mounting brackets to a
flat surface. Dimensions are shown in Figure 3.1. If the drive assembly is
mounted against a bulkhead, be sure to apply a thin coating of thermal
compound between the drive and the mounting surface before fastening
the unit in place. Do not use too much thermal compound. It is better to
use too little than too much.
Figure 3.1, Mounting Diagram
Case temperature must not 70
°
C (+158
°
F).
When selecting a mounting location, it is important to leave at least two
inches (51mm) of space around the top, bottom and sides of the unit to
allow proper airflow for cooling.