Danaher Motion Kollmorgen Speciality Electronics
System Startup
SERVO
STAR
CD-LITE User Manual
5
System Startup
PC
INK
LE
Motor
RS232
Application
Load
MOTIONLINK
For system startup you need a PC with
MOTIONLINK
for windows, LE- CD-LITE drive brush less
motor, and your application connected to the motor. With
MOTIONLINK
, you can initialize and
configure you drive to your application. After that, you will connect the drive to your servo controller.
You can communicate with the SERVO
STAR
CD-Lite through the serial port.
Since
MOTIONLINK
is designed to guide you through the operation process of the drive, the
MOTIONLINK
discussion in this section covers only general steps of use. A “dumb terminal” can also
be used to communicate to the drive. You may find this method of communication very awkward until a
certain level of familiarity with the drive’s operation is achieved.
MOTIONLINK
also provides a
terminal emulation feature that contains many useful editing tools for this type of communication.
Computer Requirements
MOTIONLINK
requires an IBM-PC or compatible computer with the following features:
♦
IBM-compatible, Pentium or higher computer.
♦
16 M RAM.
♦
Windows 95, Windows98, WindowsNT 4.0 with Service Pack 3, Windows 2000.
♦
CD-ROM player.
♦
Standard Video Adapter (CGA, MDA, EGA, MCGA, VGA, or SVGA).
♦
Serial Port (for communication link with SERVO
STAR
CD-Lite). The serial communications port
may be COM1, COM2, COM3, or COM4. COM1 is the normal configuration:
COM1: Address 3F8h, Interrupt Request #4
COM2: Address 2F8h, Interrupt Request #3
COM3: Address 3E8h, Interrupt Request #4
COM4: Address 2E8h, Interrupt Request #3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
