DANA SPICER AXLE 212, Руководство по обслуживанию, Страница: 118 / 176

118
ASSEMBLY
Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 33: Lubricate seals (13), (15) and fit the piston (12)
into the cylinder (18). Engage piston on the pin (19).
For the assembly, use a plastic hammer and push the piston
(12) to end of stroke.
FIGURE 34: Lightly lubricate the braking discs (25), (26) and
fit them onto the hub (27).
Align discs (25) and fit the cover (23).
NOTE:
The braking discs pack starts and ends with steel discs
(25).
FIGURE 35: Apply Loctite 510 on the face of the cover (23).
Fit the discs-hub-cover assembly prepared in the previous
stages onto the pinion and engage it.
12
18
27
23
25 26
23
FIGURE 36: Lubricate the o-ring (24) and fit cylinder (18)
complete with piston (12).
FIGURE 37: Introduce screws (17) and tighten in a criss-
cross method. Use a torque wrench setting of 9.5 - 10.5 N·m.
NOTE:
Before giving the final tightening, align the external surfa-
ces of the components.
FIGURE 38: 3-FUNCTION VERSION ONLY
Using a plastic hammer, push the piston (12) to the end of
stroke.
18
12
24
17
17
12