Dugan Model E-3A User Guide
Dugan Control Panel Software
37
Adding Units Manually
To add a unit with a known IP address manually, click the
+
sign at the right of the
Top Pane and enter the IP address in the dialog that appears.
To display a unit’s IP address, hover the mouse over the unit’s name.
Setting Controls
Controls can be adjusted five ways:
• Enter a dB value in the numeric field.
• Drag in the numeric field (not on iPad).
When a slider is present:
• Drag the slider up or down.
• Click in the slider track to raise or lower the value by 0.5 dB.
• Ctrl-click anywhere on the slider to reset its value to 0 (on iPad, touch and hold).
Naming Units and Channels
Connected units are displayed in the top pane in alphabetical order. If you wish to
display them in your own order, use numerical prefixes. Assigned names will appear
in the Dugan software.
To name a unit and its channels:
1.
Select a unit in the Top Pane.
2.
Select the yellow text in the Master Pane (under the Dugan logo) and type a name.
3.
Press the Enter key on the keyboard to set the name.
4.
To name a channel, select the yellow text and type a name.
5.
Press the Enter key on the keyboard to set the name.
Channel naming can be cleared by recalling
Factory Defaults
scene (see
Scenes Panel
on
page 52
). The unit name is reset by selecting
Factory Reset
on the front panel
MENU
screen or
Factory Defaults
on the
Network Setup
screen.
Содержание E-3A
