DAN-CHIEF TECHNOLOGY CO., LTD
Page 4 of 4
Manual Version: 1.0
28 Jan 2016
between the radiator & your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Maintenance and cleaning:
1. WARNING: Do not repair the device by yourself. If the appliance have any malfunction
please send the device to the manufacturer for repair.
2. Please clean surfaces by dry towel.
Instruction:
1. The modular jack is designed for RJ-45 only. The power supply equipment or switch
devices’ application with input voltage range should be fully compliant with IEEE
standards 803af for PoE products.
2. RJ-45 Ethernet plug should be fully and firmly inserted.
3. Install the interior wall space and equipment is recommended to reserve at least 1.5 cm
unilateral for air flow, and the equipment cooling holes do not shield, to prevent
overheating.
4. Suggested installation height for the product is 1~1.5M from the floor.
5. The Patch Cords used in communication cabling with remote power should be well
arranged to the devices for better installation.
6. The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquid, such as vases.
7. Orange LED light means ready to be use for a normal condition.
8. Use paperclip/PIN to click the “RESET button” once for reboot. Or, Click and HOLD the
“RESET button” for 5 seconds for default setting, while sensing any functional failure or
system disorder.
Company:
DAN-CHIEF TECHNOLOGY CO., LTD
Address:
4F., NO. 12, LN. 270, SEC. 3, BEI-SHEN RD., SHEN KENG DIST., NEW TAIPEI CITY
22205,TAIWAN
Manufacturer:
NINGBO DAN-CHIEF NETWORK TECHNOLOGIES CO, .LTD.
Address:
No.601 Hengshan West Road, Beilun District, Ningbo Zhejiang, China
