DAN-CHIEF TECHNOLOGY CO., LTD
Page 2 of 4
Manual Version: 1.0
28 Jan 2016
Caution items:
1. Always keep the user manual on or near your power adaptor, as you may need to consult
it for essential information on use, safety and maintenance.
2. In case of the product place near a window, the product should be protected against
directly sunlight as this may possible to let the product to be overheated.
3. The device is continuous operation for indoor use only.
4. The device should not be wet by any water or sea water, and should not be used by
washed hand with water.
5. It should not put the device on any humid environment.
6. Should not shock, knock or throw the device, if the equipment is damaged please recycle
the equipment.
7. The device should be used under operating ambient temperature and humidity range.
8. Power usage with the Input voltage range should be fully compliant with IEEE standards
803af for PoE products.
9. Do not disassemble the outer cases, parts, or internal component, while sensing
abnormal heating or functional disorder.
10. The devise does not near the area of strong magnetic or electromagnetic waves.
11. When installing these equipments, all requirements of the mentioned standard must be
fulfilled.
12. Do not operate the product with damaged or substandard wiring; it must be replaced by
the manufacturer.
Before usage:
1. WARNING:
This product can be used for equipment and meets the following conditions
:
−
Do not use this product near pacemakers and other medical machinery, the
electromagnetic interference makes medical equipment malfunction and causing
life-threatening.
−
The leakage current test shall be checked in end product.
−
Do not touch and connect the cables with this product when it is lightning.
−
Do not use or install when your hands are wet.
−
This product is designed for general usage. (Do not use this product as a
persona l security device, or associated it with medical equipment, nuclear power
equipment, aviation, or aerospace machinery, etc., and do not connect those
devices neither.)
−
The electromagnetic exposure amount MPE standard value of 1mW / cm2, The
testing product measured values: 0.071mW / cm2
