damian LXS9 Series, Установка и обслуживание

Страница: 37 / 46

Serie "LXS9"
Pagina A - 15
Rev. M - 01
EVA-DTS PARAMETERS
>
P
ASSWORD CODE RESET
(EVA-DTS):
To reset
the “Security” and “Passcode” codes foreseen by the DDCMP protocol (EVA-DTS) to prevent
anyone from being able to access and download the data relative to the vending machine proceeds using
an IRDA handheld device.
Thanks to these protection codes, the data can be downloaded only if those set on the handheld device
coincide with those acquired previously by the vending machine.
If the 2 codes do not correspond, the following error message will appear:
In this case, the codes acquired by the vending machine must be reset (Reset Passcode) by entering the
password.
At this point the vending machine has no protection code and will reacquire a new one at the time of the
next connection with a handheld device that has a code other than 0 set .
AUDIT PARAMETERS
NOTE: It is possible to display a minimum list of sales data on the automatic vending machine. If an MDB
system is installed, the vending machine collects more detailed data, available in the EVA-DTS format.
>
P
ARTIAL COUNTER OF NUMBER OF VENDING MACHINE SALES
:
To read the total number of vending machine sales since the last reset.
>
P
ARTIAL COUNTER OF VALUE OF VENDING MACHINE SALES
:
To read the total amount collected by the vending machine since the last reset.
»
C
OUNTER OF NUMBER OF SALES PER SELECTION
:
To read the total (absolute and partial since the last reset) number of sales for each individual vending
machine selection.
DDCMP error
9071
Programming
EVA DTS param.
Reset Passcode
->->->
Password
00000
F
F
Programming
Audit data
Partial n. sales
Current value
F
Programming
Audit data
Part.Val.Sales
Current value
F
Programming
Audit data
Num.Sales Motors
->->->
Motor : xx
P xxxxx T xxxxx
F
F