Dalxo EB-67ERCD9-11BC54T, Руководство пользователя

Страница: 11 / 26

9
Connection to the Mains Supply
Devices must be connected according to current rules. It is recommended to be wired by a
professional electrician.
Check that the rated power of power and outlet match the max wattage indicated on the
nameplate.
The correct connection is to insert the plug into a socket with a third contact point to the
ground.
If the device has a power cord installed but no plug, wire it as follows:

The “yellow/green” grounded wire, which must be connected to the terminal should be
0.39" (10mm) longer than others.

The “blue” neutral line has to be connected to the terminal marked with letter “N”.

The “Black, Brown or Red” live wires have to be connected to terminal “L”.

Mains connection can also be made by fitting a double pole switch with a min gap between
the contacts of 0.12 inches ( 3mm ), proportionate to the load.
The yellow/green earth wire should not be controlled by the switch.

Once the appliance is in place, the plug or two-pole switch for the mains connection should
be handy.
IMPORTANT
The power cord should be placed 120°F (50°C) below the ambient temperature.
Safety can only be ensured if it is properly connected to a valid grounded power source in
accordance with electrical safety regulations.
The manufacturer is not responsible for any damage to persons or objects due to lack of a
ground connection.
This equipment must be grounded.
If a gas stove needs to be installed above the wall
oven, the distance between them should be >
1.58”.