Dalsa Touch GEVA GV-312T, Руководство по установке

Страница: 23 / 29

23
The Sapera Acquisition Wizard detects all available Genie Cameras, and creates a file
“SaperaLTDrv.ini” that identifies them in Sherlock. You can enable or disable camera
ports, and select camera configuration files using this utility.
NOTE : If a configuration file
does not match the number of cameras, the Sapera LT and Genie drivers will not load
and Sherlock will not run saved programs. Instead, Sherlock will open a new
investigation (solution) file.
The Sherlock application uses the settings stored in the camera, or in camera
configuration files. You can also use Sherlock instructions to change Gain, Exposure
(shutter time) or Strobe pulse width (IO:Camera:SetNumberFeature) programmatically.
When you launch the wizard you will see the dialog below. All cameras connected to the
GV 312T should be listed in the device window. Click the “save” button to store the
configuration in the SaperaLTDrv.ini file.
The Sapera Acquisition Wizard