Shad-o-Scan 3001/4501 User Manual (Draft)
37
Teledyne DALSA
Initialised
DPC Enable
DPCEnable
RW
Turns On/Off
Defect Pixel
Correction
On
-
-
On
On
On: Enabled
-
-
-
Off
Off
Off: Disabled
-
-
-
DPC Processing DPCActive
RO
Shows if DPC
processing is
enabled and
activated
-
-
-
Not Active
NotActive
DPC
processing
not active
-
-
-
Active
Active
DPC
processing
active
-
-
-
DPC Error
Handling
DPCErrorHandli
ng
RW
Changes
Defect Pixel
Correction
Error
Handling
SetWhite -
-
Set Pixel to
White
SetWhite
Set Pixel to
White
-
-
-
Keep Original
Pixel
KeepOriginal
Keep Original
Pixel
-
-
-
Defect Pixel Correction
To enable Defect Pixel Correction, set the
DPC Enable
to
On
(default setting).
By means of
Factory/Customer Map Select
the selection of the active map can be influenced.
When it’s on
Auto,
Customer maps have priority if available else the Factory maps will be
used.
DPC Processing
will show
Active
when a valid DPC map is in use.
Flat Field Correction
To enable Flat Field Correction, set the
FFC Enable
to
On
and the
FFC Mode
to
Normal
(default setting).
By means of
Factory/Customer Map Select
and
Map Select,
the selection of the active
reference maps can be influenced. When both are on
Auto
, the 1
st
dark and gain map in
the row which fits to the resolution and full well capacity setting will be selected.
Customer maps have priority over Factory maps. When
Factory/Customer Map Select
is set
to
Factory
or
Customer,
the selection will limited to those categories.
When
Map Select
is set to
Manual,
the active FFC Gain and FFC Dark map can be selected
from a list of EIGHT maps (Map 0
–
Map 7). Factory maps are stored in a fixed order.
Customer maps can be organized to the user’s preference. As an example, it is possible to
