Piranha ES-Sx User Manual
03-032-20162-00
Teledyne DALSA
52
A2 Commands: Quick Reference
As a quick reference, the following table lists all of the camera configuration commands
available to the camera user. For detailed information on using these commands, refer to
Chapter 3. Note: This table does not list “get” commands. Refer to section
Table 9: Command Quick Reference
Mnemonic
Syntax Parameters Description
correction calibrate fpn
ccf
Performs FPN calibration and
eliminates FPN noise by subtracting
away individual pixel dark current.
Refer to
for details.
calculate camera gain
ccg
i
Calculates the camera gain according to
the selected algorithm.
i
= Calibration target value in a range
from:
4096
to
16064
DN (14 bit LSB).
calculate PRNU
algorithm
cpa
i i
Performs PRNU calibration according
to the selected algorithm.
The first parameter is the algorithm
where
i
is:
2
= Calculates the PRNU coefficients
using the entered target value as shown
below:
PRNU Coefficient =
Target
(AVG Pixel Value ) - FPN
i
i
i
The calculation is performed for all
sensor pixels but warnings are only
applied to pixels in the region of
interest. This algorithm is useful for
achieving uniform output across
multiple cameras.
4
= This algorithm is the same as 2 with
the exception that it only calculates
PRNU for the pixels within the current
Region of Interest (ROI).
The second parameter is the target
value to use in a range from
4096
to
16220
DN.
correction set sample
css
m
Set number of line samples averaged
for pixel coefficient calculations or for
output of
gla
command. Values:
1
,
1024, 2048, 4096
.
Refer to
display pixel coeffs
dpc
x1 x2
Displays the pixel coefficients in the
order FPN, PRNU, FPN, PRNU, …
x1
= Pixel start number
x
2= Pixel end number
In a range from
1
to
12000
.
Parameters:
f
= float
m
= member of a set
s
= string
x
= pixel column number
y
= pixel row number
