Dalsa Piranha 3 P3-80-08k40-00-R Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 91

background image

Piranha 3 User Manual

03-032-10216-06

Teledyne DALSA

2

© 2011 Teled yne DALSA. All inform ation p rovid ed  in this m anu al is believed  to be
accu rate and  reliable. N o resp onsibility is assu m ed  by Teled yne DALSA for its u se.
Teled yne DALSA reserves the right to m ake changes to this inform ation w ithou t notice.
Rep rod u ction of this m anu al in w hole or in p art, by any m eans, is p rohibited  w ithou t
p rior p erm ission having been obtained  from  Teled yne DALSA.

About Teledyne Technologies and Teledyne D ALSA, Inc.

Teled yne Technologies is a lead ing p rovid er of sop histicated  electronic su bsystem s,
instru m entation and  com m u nication p rod u cts, engineered  system s, aerosp ace engines,
and  energy and  p ow er generation system s. Teled yne Technologies’ op erations are
p rim arily located  in the United  States, the United  Kingd om  and  Mexico. For m ore
information, visit Teledyne Technologies’ website at www.teledyne.com.

Teled yne DALSA, a Teled yne Technologies com p any, is an international lead er in high
p erform ance d igital im aging and  sem icond u ctors w ith ap p roxim ately 1,000 em p loyees
w orld w id e, head qu artered  in Waterloo, Ontario, Canad a. Established  in 1980, the
com p any d esigns, d evelop s, m anu factu res and  m arkets d igital im aging p rod u cts and
solu tions, in ad d ition to p rovid ing MEMS p rod u cts and  services. For m ore inform ation,
visit Teledyne DALSA’s website at www.teledynedalsa.com.

Support

For fu rther inform ation not inclu d ed in this m anu al, or for inform ation on Teled yne
DALSA’s extensive line of image sensing products, please contact:

N orth America

605 McMu rray Rd
Waterloo, ON N 2V 2E9
Canad a

Tel: 519 886 6000
Fax: 519 886 8023

w w w .teled yned alsa.com

sales.am ericas@teled yned alsa.com
su p p ort@teled yned alsa.com

Europe

Breslau er Str. 34

D-82194 Gröbenzell (Mu nich)

Germ any

Tel: +49 - 8142 – 46770

Fax: +49 - 8142 – 467746

w w w .teled yned alsa.com

sales.eu rop e@teled yned alsa.com
su p p ort@teled yned alsa.com

Asia Pacific

Ikebu ku ro East 13F

3-4-3 H igashi-Ikebu ku ro

Toshim a-ku , Tokyo 170-0013

Jap an

Tel: 81 3 5960 6353

Fax: 81 3 5960 6354 (fax)

w w w .teled yned alsa.com

sales.asia@teled yned alsa.com
su p p ort@teled yned alsa.com

Cam era Link is a trad em ark registered by the Au tom ated Im aging Association, as chair of
a com m ittee of ind u stry m em bers inclu d ing Teled yne DALSA.

All manuals and user guides at all-guides.com

«
1
2
3
4
...
»

Содержание Piranha 3 P3-80-08k40-00-R




























































































Отзывы:

Нет отзывов

Похожие инструкции для Piranha 3 P3-80-08k40-00-R

Welcome M21311P1-A

Бренд: ABB Страницы: 15

security system

Бренд: Safe-at-home Страницы: 5

Security Camera

Бренд: Raritan Страницы: 2

Бренд: Data Harvest Страницы: 19

Security Camera

Бренд: TANDBERG Страницы: 247

NVAHD-2DN3201MH/IR-1-PIR

Бренд: Novus Страницы: 32

Бренд: Hitron Страницы: 71

INFRAcontrol R 180

Бренд: Kopp Страницы: 2

Бренд: DualLite Страницы: 2

Бренд: Huviron Страницы: 2

Caregiver CAS-FAM

Бренд: Secure Страницы: 3

Бренд: GST Страницы: 2

Бренд: United Security Products Страницы: 16

Бренд: Nellcor Страницы: 18

Бренд: Hi Sharp Страницы: 3

Бренд: IVIEW Страницы: 29

Бренд: SHIRE CONTROLS Страницы: 10

Бренд: i-PRO Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды