Linea HS Series Camera User's Manual
Linea HS Series Cameras
•
45
Power and GPIO Connections
The camera uses a single 12-pin Hirose male connector for power, trigger and strobe signals. The
suggested female cable mating connector is the
Hirose model HR10A-10P-12S
.
12-Pin Hirose Connector Signal Details
The following figure shows the pinout identification when looking at the camera
’s
12-pin male
Hirose connector. The table below lists the I/O signal connections.
1
4
6
7
12
11
3
2
10
8
9
5
Figure 24: 12-pin Hirose Pin Numbering
Table 13: 12-pin Hirose Pin Assignment
Pin Number
Input / Output
Signal Details
Notes
1
Power Ground
2
+12 V to +24 V power
3
Output
Line 3 Out
0 to 3.3 V TTL
4
Output
Line 4 Out
0 to 3.3 V TTL
5
Input
Line 1/ Trigger / Phase A
0 to 3.3 V TTL
6
Input
Line 2 / Scan Direction/Phase B
0 to 3.3 V TTL
7
Output
Line 5 Out
0 to 3.3 V TTL
8
Output
Line 6 Out
0 to 3.3 V TTL
9
Power Ground
10
+12 V to +24 V power
11
Signal Ground
Note: intended as a return path for
GPIO signal and not intended as a
power ground
12
Signal Ground
Note: intended as a return path for
GPIO signal and not intended as a
power ground