Genie Monochrome Series-GigE Vision Camera
Technical Specifications
109
Lens Selection Overview
Vision component suppliers and system integrators will have detailed information on lens products at different price
points, relative to quality and for different imaging situations. This section provides a general overview to selecting
a lens for the Genie cameras.
The first two lens parameters are based on correctly matching the lens to the Genie model. Genie is available with
either a C-mount or CS-mount (two standards for flange-focal length), plus one of four sensor sizes dependent on
sensor resolution. These items are covered first followed by brief information on other lens parameters to consider.
Lens Mount
As shown in
"
Mechanical Specifications
" on page 97
Genie comes in C-mount and the CS-mount. The CS-mount is
a standard with a shorter flange-focal length for space sensitive applications. The C-mount Back Focal Distance is
17.52 mm while CS-mount Back Focal Distance is 12.52 mm. The lens selected must be for the Genie mount used,
else it may not be able to focus on the target.
Lens Sensor Size
An important lens parameter is its sensor size which defines the largest camera sensor usable with that lens before
vignetting occurs (exposure that shades off gradually at the image edges). The lens size specification is in imperial
units for historical reasons, and does not directly describe the sensor diameter (even after conversion to metric).
The following figure shows different lens size standards relative to the maximum camera sensor they will properly
expose. The lens sensor standard (in imperial units) and the sensor diameter in millimeters are the two important
parameters when choosing a lens. Refer to
"
Product Part Numbers
" on page 7
for a summary of Genie model,
resolution, and sensor size.
9.
6
0
12.80
16
.00
m
m
(1 in
ch)
6.
6
0
8.80
11
.00
(2/3
inc
h)
5.4
0
7.20
9.0
0
(1/1
.8
inc
h)
4.
80
6.40
8.0
0
(1/2
inc
h
)
3.
60
4.80
6.0
0
(1/3
inc
h
)
Comparison of Standard Sensor Sizes (dimensions in mm)
