28
Falcon2 4M, 8M, and 12M Camera User's Manual
03-032-20107-01
Teledyne DALSA
Saving and Restoring Camera Settings
The p aram eters u sed to select, load and save u ser sets are grou p ed together u nd er the Cam era
Inform ation set of featu res.
Camera Information
Parameter
Choices
User Set Defau lt Selector
Select the cam era p aram eters to load w hen the cam era is reset or
p ow ered u p as the Factory set, or as User Set 1, 2, 3, or 4.
Selecting the set from the list au tom atically saves it as the d efau lt
set.
User Set Selector
Select the Factory, User, or FFC set to Save or Load .
Factory Set
User Set 1, 2, 3, 4
User Set Load
Load the set sp ecified by User Set Selector to the cam era and m ake
it the active / cu rrent set.
User Set Save
Save the cu rrent set as selected u ser set.
Description of the Camera Settings
The cam era op erates in one of three settings:
1.
Cu rrent session.
2.
User setting.
3.
Factory setting (read -only).
4.
Defau lt setting.
The cu rrent settings can be saved (thereby becom ing the u ser setting) u sing the User Set Save p aram eter.
A p reviou sly saved u ser setting (User Set 1 to 4) or the factory settings can be restored u sing the User Set
Selector and User Set Load p aram eters.
Either the Factory or one of the User settings can be saved as the Defau lt Setting by selecting the set in the
User Set Defau lt Selector. The chosen set au tom atically saves as the d efau lt setting and is the set load ed
w hen the cam era is reset or p ow ered u p .
The relationship betw een these three settings is illu strated in Figu re 9. Relationship betw een the Cam era
Settings:
All manuals and user guides at all-guides.com
